KXSI-XXWXXX-AXDFX1 2-40W For Non-dim1

K5SI 15W350 A4DF1

K4SI XXWXXX DF1

KXSI-XXWXXX-AXDFX1 2-40W For Non-dim1

Independent fixed output LED Driver
Constant current
Both non-dimmable and triac dimmable optional
Specific, optimized output current and voltage
Output current 60-950mA for dim, 150-1000mA for non-dim
Output power 3-40W for dim, 2-40W for non-dim
High efficiency, non-dimmable type efficiency upto 68-86%
The whole range are features with flicker-free performance
Idea circuit design overcome luminaire flickering with voltage
Perfect triac dimming compatibility, applicable for leading & trailing edge dimmer, smooth dimming effect
Low noise operation, especially for leading edge dimmer
Nominal life-time up to 50,000 h
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Small, super compact dimensions

selv

tuv

rohs

saa

1.1

1.2

1.3

Specification Files

Overview

Driver Datasheet (Triac Dimmable)
Code		K3SI-XXWXXXDF1	K4SI-XXWXXX-DF1	K5SI-10W230-A4DF1	K5SI-15W350-A4DF1
Input	Input Power	5-10W	10-15W	10 / 8 / 7 / 5W	15 / 13 / 11 / 9W
	Input Voltage	180-264V
	Rated Input Voltage(V)	200-240V
	Frequency	50Hz
	Input Current	≤0.07A	≤0.1A	≤0.07A	≤0.1A
	Rated Input Current	≤0.06A	≤0.09A	≤0.06A	≤0.09A
	Power Factor (Typ)	0.9 @230VAC ,full load (Please refer to "Power Factor (PF) Characteristic" section)
	Total Harmonic Distortion(Thd)	<20% @230V
	Efficiency (Typ)	≥78%	≥80%	≥78%	≥80%
	Inrush Current (Typ.)	2.16A/48uS	4.32A/53uS	1.5A/148uS	4.32A/53uS
	Max Circuit Breaker	Please refer to" Circuit breaker Specification"
	Leakage Current	<0.5mA @240V
	No Load Wattage	<1w @230V
Output	Output Voltage Range	DC23-40V
	Rated Output Current	100-230mA	200-350mA	Current level selectable via DIP switch, please refer to"DIP SWITCH TABLE" section
	Rated Output Current	100-230mA	200-350mA	230/180/150/100mA	350/300/250/200mA
	Line Regulation	±5%
	Open Circuit Voltage (Max)	50V
	Setup Time(Note1)	500ms@230V
	Flickering Index(IEEEStd 1789)	5%(LOW RISK)
Protection	Short Circuit Protection	Constant current limiting, recovers automatically after fault condition is removed
	Over Voltage Protection	Shut down o/p voltage
	Over Temperature Protection	Shut down o/p voltage, recovers automatically after temperature goes down
Environment	Ambient temperature range ta	-20…+45°C
	Maximum case temperature tc	85°C (Measured on tc point indicated of the product label, tc not exceeded)
	Operating temperature	-20…+45 °C
	Storage temperature/humidity	-25…+85 °C; 5-95% RH
	Relative humidity	5…85%
	Environmental rating	Indoor
	IP rating	IP20
	Life time	>50,000H @25°C
Safety&EMC	Safety Standards	IEC/EN61347-1, IEC/EN61347-2-13, IEC/EN62384 independent,GB19510.14,GB19510.1 approved
	Withstand Voltage	I/P-O/P:3.75KVac,<5mA 60S; I/P-FG:1.6KVac,<5mA 60S; O/P-FG:0.5KVac,<5mA 60S
	Isolation Resistance	I/P-O/P: 500VDC, ≥100M Ω
	Surge	IEC/EN61000-4-5(L-N:0.5KV L N-PG:1KV )
	EMC Emission	IEC/EN55015, IEC/EN61000-3-2
	EMC Immunity	IEC/EN61000-4-2,3,4,5,6,8,11; IEC/EN61547
Other	Dimension(mm)	90.146.026.2mm(LWH)	110.14626.2mm(LWH)	110.152.226.2mm(LWH)
Other	Weight	0.078Kg	0.09K	0.105Kg	0.115Kg