VSI-XXWXXX-NFX Constant Current

VSI-XXWXXX-NFX Constant Current

Independent fixed output LED Driver
Constant current
Both non-dimmable and triac dimmable optional
Specific, optimized output current and voltage
Output current 150-1050mA for dim, 180-1500mA for non-dim
Output power 8-45W for dim, 8-60W for non-dim
High efficiency, non-dimmable type efficiency upto 89-90%
Whole range features with flicker-free performance
Small, super compact dimensions
Idea circuit design overcomes luminaries flickering with voltage fluctuation
Perfect triac dimming compatibility, applicable for leading & trailing edge dimmers, smooth dimming effect
Low noise operation, especially for leading edge dimmer
Nominal lifetime up to 50,000 h
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e

rohs

class2

selv

1-10vdim

isolatedD

singleD

Specification Files

Overview

	Driver Datasheet (Non-dimmable )
Code		VSI-XXWXXX-NF1(G)/VSI-XXWXXX-NF1
Input	Input Power	8-15W	15-25W	25-40W	40-60W
	Input Voltage	200-264V
	Rated Input Voltage(V)	220-240V
	Frequency	50/60Hz
	Input Current	≤0.09A	≤0.13A	≤0.23A	≤0.34A
	Rated Input Current	≤0.08A	≤0.14A	≤0.21A	≤0.31A
	Power Factor (typ)	0.9
	Total Harmonic	<20% @230V
	Distortion(THD)	<20% @230V
	Efficiency (typ)	≥86%	≥88%	≥90%	≥90%
	Inrush Current (Typ.)	15.1A/113uS	16A/214uS	24.2A/326uS	31A/410uS
	Max Circuit Breaker	Please refer to" Circuit breaker Specification"
	Leakage Current	<0.5mA/240V
	No Load Wattage	<0.5w @230V
Output	Output Voltage Range	30-40V
	Rated Output Current	180-350mA	350-600mA	600-1000mA	1000-1500mA
	Line Regulation	±5%
	Open Circuit Voltage (max)	50V
	Setup time(note1)	500ms @230V
	Flickering Index(IEEEStd 1789)	0.5%(NO RISK)	0.8%(NO RISK)	0.5%(NO RISK)
Protection	Short Circuit Protection	Constant current limiting, recovers automatically after fault condition is removed
	Over Voltage Protection	Shut down o/p voltage
	Over Temperature Protection	Shut down o/p voltage, recovers automatically after temperature goes down
Safety&EMC	Safety Standards	IEC/EN61347-1, IEC/EN61347-2-13, IEC/EN62384 independent,GB19510.14,GB19510.1 approved
	Withstand Voltage	I/P-O/P:3.75KVac,<5mA 60S
	Isolation Resistance	I/P-O/P: 500VDC, ≥100M Ω
	Surge	IEC/EN61000-4-5(L-N:0.5KV)		IEC/EN61000-4-5(L-N:1KV)
	EMC Emission	IEC/EN55015, IEC/EN61000-3-2
	EMC Immunity	IEC/EN61000-4-2,3,4,5,6,8,11; IEC/EN61547
Other	Dimension	933726mm(LWH)	933726mm(LWH)	1184426mm(LWH)	1384730mm(LWH)
Other	Weight	0.065Kg	0.070Kg	0.095Kg	0.150Kg