This is an external smart driver which adopts Casambi Bluetooth smart technology. It can control on/off and brightness with very high-cost performance. Casambi is an advanced lighting control solution based on Bluetooth Low Energy (BLE). The luminaire can be easily implemented in the lighting control system or existing lighting scenes. Creating an optimal solution in terms of ease of installation and functionality with minimal additional hardware and deployment costs.
| Model | ASI-10W250-A8B2-I03 | ASI-25W600-A8B2-I03 | ASI-45W1050-A8B2-I03 | |
|---|---|---|---|---|
| Input | Input POWER | 5/6/7/8/9/10/11/12W | 12/14/16/18/20/22/24/25W | 28/30/32/34/36/38/40/45W |
| Rated Input Voltage(V) | AC220-240V | |||
| Input Voltage(V) | AC198-264V | |||
| Frequency | 50/60Hz | |||
| Rated Input Current | ≤0.04A | ≤0.1A | ≤0.23A | |
| Input Current | ≤0.06A | ≤0.14A | ≤0.25A | |
| Power Factor (typ) | 0.9 | |||
| Total harmonic distortion(THD) | <10% @230V full load | |||
| Efficiency (typ) | ≥72%(@230VAC full load) | ≥84%(@230VAC full load) | ≥86%(@230VAC full load) | |
| Inrush currentN (Typ.) | 5.3A/42uS | 11.6A/22uS | 10.3A/43uS | |
| Max circuit breaker | Please refer to" Circuit breaker Speicification" | |||
| Leakage current | <0.5mA/240V | |||
| No load wattage | <0.5W @230V | |||
| Output | Output Voltage range | DC28-40V | ||
| Rated output current | 75/100/125/150/175/200/225/250mA | 250/300/350/400/450/500/550/600mA | 700/750/800/850/900/950/1000/1050mA | |
| Line Regulation | ±5% | |||
| Open circuit voltage (max) | 50V | |||
| Setup time(note1) | <0.5s @230V | |||
| Flickering IndexIEEEStd 1789) | 2%(NO RISK) | |||
| IEC-PST | ≤1 | |||
| CIE (SVM) | ≤0.4 | |||
| Protection | Short circuit protection | Constant current limiting, recovers automatically after fault condition is removed | ||
| Over voltage protection | Shut down o/p voltage | |||
| Over temperature protection | Shut down o/p voltage, recovers automatically after temperature goes down | |||
| Environment | Ambient temperature range ta | -20… +50 °C | ||
| Maximum case temperature tc | 90°C (Measured on tc point indicated of the product label, tc not exceeded) | |||
| Operating temperature | -20… +45 °C | |||
| Storage temperature/humidity | -25… +85 °C; 5-95% RH | |||
| Relative humidity | 5…85% | |||
| Environmental rating | Indoor | |||
| IP rating | IP20 | |||
| Life time | >50,000H @25°C | |||
| SA FF TY & EMC | Safety standards | IEC/EN61347-1, IEC/EN61347-2-13, IEC/EN62384 independent,GB19510. 14,GB19510.1 approved | ||
| Withstand voltage | I/P-O/P:3.75KVac,<5mA 60S; I/P-FG:1.6KVac,<5mA 60S; O/P-FG:0.5KVac,<5mA 60S | |||
| Isolation Resistance | I/P-O/P: 500VDC, ≥4M Ω | |||
| surge | IEC/EN61000-4-5(L-N:1KV) | |||
| EMC Emission | IEC/EN55015, IEC/EN61000-3-2 | |||
| EMC Immunity | IEC/EN61000-4-2,3,4,5,6,8,11; IEC/EN61547 | |||
| Other | Dimension | Refer to the specification sheet | ||
| Weight | Refer to the specification sheet | |||
