This is a super slim full PC design batten,it adopts highlight transmittance PC internal stripe design lampshade to ensure uniform light output.The PA12
terminal is compatible with the 2.5m wire,DIP switch for CCT and wattage is located on end cap which is easy to do CCT and wattage adjustment.
Application Areas：It is widely used in workshop,warehouse,parking lot factories,shopping mall etec
| Code | DB199-600-18W-A3 | DB199-1200-40W-A3 |
|---|---|---|
| Dimension(mm) | 500*82*35 | 200*82*35 |
| Cutout (mm) | ||
| Watt(W) | 10W/14W/18W | 20W/30W/40W |
| Rated Input Voltage | 230VAC | |
| Input Voltage | 220-240VAC | |
| IFD Module Input | ||
| Light Source | SMD | |
| SDCM | <6 | |
| CCT(K) | 1-CCT:3000K/4000K/5000K/5700K ||3-CCT:3000K+4000K+5700K | |
| CCT Selection DIP Switch | Yes | |
| Non-DIM 1-CCT Luminous Flux (lm)±5% CRI80 | 10W:1100-1250 | 20W:2600-2800 |
| 14W:1400-1650 | 30W:3600-3900 | |
| 18W:1900-2050 | 40W:4400-4900 | |
| CRI80 | ||
| 0W:1100-1250 | 20W:2600-2900 | |
| 14W:1400-1700 | 30W:3600-4000 | |
| 18W:1900-2100 | 40W:4400-5000 | |
| CRI | 80 | |
| Beam Angle() | 120° | |
| UGR | ||
| IED Driver | Driver built-in | |
| Dimming Optior | ||
| Sensor | ||
| Emergency Kits | ||
| Electrical Class | Class I | |
| Ingress Protection(IP Rating | IP20 | |
| Impact Resistance(IK Rating) | ||
| Product Finishing | White RAL9016 | |
| Optics Material | PC | |
| Housing Materia | PC | |
| Lifetime(hr) | 50,000h | |
| Glow wire test (℃) | 750℃ | |
| Operating Temp.(℃) | -20°℃~40℃ | |
| rage p. (℃) | -20°℃-65℃ | |
| nstallation | Surface mount | |
