| Code |
T1-I15W250-B( Z / W ) |
T2-I25W580-B ( Z / W ) |
T3-I45W1050-B ( Z / W ) |
| Input |
Input Power |
8-15W |
15-25W |
25-45W |
| Input Voltage |
180-265V |
| Rated Input Voltage(V) |
200-240V |
| Frequency |
50/60Hz |
| Input Current |
≤0.09A |
≤0.14A |
≤0.25A |
| Rated Input Current |
≤0.08A |
≤0.13A |
≤0.23A |
| Power Factor (Typ) |
0.9 |
| Total Harmonic Distortion(Thd) |
<20% @230V |
| Efficiency (Typ) |
≥80% |
≥81% |
≥85% |
| Inrush Current (Typ.) |
8.2A/39.6uS |
8.6A/56uS |
30.7A/42.2uS |
| Max Circuit Breaker |
Please refer to" Circuit breaker Specification" |
| Leakage Current |
<0.5mA @240V |
| No Load Wattage |
<1w @230V |
| Output |
Output Voltage Range |
28-40V |
| Rated Output Current |
200-350mA |
350-580mA |
580-1050mA |
| Line Regulation |
±5% |
| Open Circuit Voltage (Max) |
50V |
| Setup Time(Note1) |
<1s @230V |
| Flickering Index(IEEEStd 1789) |
6%(NO RISK) |
| Protection |
Short Circuit Protection |
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down o/p voltage |
| Over Temperature Protection |
Shut down o/p voltage, recovers automatically after temperature goes down |
| Safety&EMC |
Safety Standards |
IEC/EN61347-1, IEC/EN61347-2-13, IEC/EN62384 independent,GB19510.14,GB19510.1 approved |
| Withstand Voltage |
I/P-O/P:3.75KVac,<5mA 60S |
| Isolation Resistance |
I/P-O/P: 500VDC, ≥100M Ω |
| Surge |
IIEC/EN61000-4-5(L-N:0.5KV, ) |
IEC/EN61000-4-5(L-N:1KV, ) |
| EMC Emission |
IEC/EN55015, IEC/EN61000-3-2 |
| EMC Immunity |
IEC/EN61000-4-2,3,4,5,6,8,11; IEC/EN61547 |
| Other |
Dimension(mm) |
119*51*24mm(L*W*H) |
134*51*24mm(L*W*H) |
160*56*24mm(L*W*H) |
| Weight |
0.09Kg |
0.113Kg |
0.163Kg |
